Aurenna's Ring Size Guide
You can measure your ring size at home by following these steps:
- Cut a strip of paper or a piece of string approximately the length of your finger.
- Wrap the paper or string around the finger where you'll wear the ring. It should fit snugly but not too tight.
- Mark the point where the paper or string overlaps around your finger.
- Using the millimeter or inch side of a ruler, lay the paper or string flat and measure the length from one end to the mark. This measurement is the circumference of your finger.
Alternatively, you can select a well-fitting ring that you already own and measure the inside diameter of the band (straight line across the center).
Aurenna Ring Size Chart:
| US | 4.5 | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 | 8.5 |
| Diameter (in) | 0.60 | 0.62 | 0.63 | 0.65 | 0.67 | 0.68 | 0.70 | 0.71 | 0.73 |
| Diameter (mm) | 15.3 | 15.7 | 16.1 | 16.5 | 16.9 | 17.3 | 17.7 | 18.1 | 18.5 |
| Circumference(in) | 1.89 | 1.94 | 1.99 | 2.04 | 2.09 | 2.14 | 2.19 | 2.24 | 2.29 |
|
Circumference(mm) |
48.1 |
49.3 |
50.6 |
51.8 |
53.1 |
54.3 |
55.6 |
56.9 |
58.1 |
If your size falls between two sizes, we recommend selecting the larger size.
